ABB REM615 ANSI 애플리케이션 매뉴얼 - 페이지 19

{카테고리_이름} ABB REM615 ANSI에 대한 애플리케이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB REM615 ANSI 20 페이지. Motor protection and control

페이지 인쇄

1YHT530017D05 B

REM615

Application Manual

Table 2:

Plug-in unit and case

Main unit Slot ID

Content options

Plug-in

HMI

unit

X100

Auxiliary power/BO

module

X110

BIO module

X120

AI/BI module

Case

X130

AI/BI module

Optional RTD/mA module

Optional BIO module

X000

Optional communication

module

1) BIO module (X110) is optional for configuration A.

2) The 0.2/1A input is normally used in applications requiring sensitive earth-fault protection and

featuring core-balance current transformers.

Rated values of the current and voltage inputs are basic setting parameters of the

IED. The binary input thresholds are selectable within the range 18...176 V DC by

adjusting the binary input setting parameters.

The connection diagrams of different hardware modules are presented in this manual.

See the installation manual for more information about the case and

the plug-in unit.

Small (4 lines, 16 characters)

Large (8 lines, 16 characters)

48-250 V DC/100-240 V AC; or 24-60 V DC

2 normally-open PO contacts

1 change-over SO contact

1 normally-open SO contact

2 double-pole PO contacts with TCS

1 dedicated internal fault output contact

8 binary inputs

4 signal output contacts

3 phase current inputs (1/5A)

1 residual current input (1/5A or 0.2/1A)

4 binary inputs

Only with configuration B:

3 phase current inputs (1/5 A)

1 residual current input (1/5 A or 0.2/1 A)

3 phase voltage inputs (60-210 V)

Only with configuration C and J:

3 phase voltage inputs (60-210 V)

1 residual voltage input (60-210 V)

4 binary inputs

Optional for configurations A and B:

2 generic mA inputs

6 RTD sensor inputs

Optional for configuration B:

6 binary inputs

3 signal output contacts

See the technical manual for details about different

types of communication modules.

Section 2

REM615 overview