Alde Compact 3020 HE 사용 설명서 - 페이지 8

{카테고리_이름} Alde Compact 3020 HE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alde Compact 3020 HE 19 페이지.
Alde Compact 3020 HE에 대해서도 마찬가지입니다: 사용 설명서 및 설치 지침 (8 페이지), 설치 지침 수정 (4 페이지)

페이지 인쇄

1. Troubleshooting

7. TOOLS MENU

The tools menu can be accessed from the settings menu.

+22°C

1 kW

7:1

TOOLS MENU – FUNCTIONS

The following tools are available from the tools menu.

A grey function button means the function has not been installed and/or activated in "Installed Accesso-

ries", see section 11.

Settings

1. Night auto

Automatically changes certain functions

during the night. You can select whether

this is to take place every night or a spe-

cific night each week. The functions that

can be changed are:

•

Temperature

•

*Change to temperature sensor in

sleeping accommodation area.

•

Invert display

•

Turn off the domestic hot water

•

*AC in quiet mode

2. Day auto

Automatically changes certain functions,

e.g. if you are away for a while during the

day. Select that it takes place every day or

a specific day each week. The functions

that can be changed during the day are:

•

Temperature

•

Turn off the domestic hot water

3. Prio setting

With this function you can choose to prio-

ritise (select) electricity or gas as the main

alternative.

Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle

manufacturer's instructions.

1. The control panel showing the settings menu.

Press the tool symbol to access the tools menu

10 11

Settings

4. Clock

The clock must be set if engine heater

start, night and/or day auto and

automatic start are to work.

If 12 V power is lost, the clock will

stop and will no longer be displayed.

Installing *battery backup will prevent

this happening

5. Return

To return to the previous menu, press

this symbol.

6. *Setting room sensor

Select which temperature sensor is to

be active. Here you can select whether

the sensor located in the daytime living

area, the sleeping accommodation

or in the panel is to be active. If Auto

is selected, the sensor in the panel is

active and will automatically switch to a

room sensor (sofa and/or bed) if one of

these is connected. If two room sensors

are connected, it will be the one for the

daytime living area that is active (sofa).

Settings

(part no. 3010 420).