Xerox WORKCENTER 5230 참조 매뉴얼 - 페이지 9
{카테고리_이름} Xerox WORKCENTER 5230에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WORKCENTER 5230 29 페이지. Pdl reference guide
Xerox WORKCENTER 5230에 대해서도 마찬가지입니다: 서비스 매뉴얼 필드 (24 페이지)
페이지 인쇄
Feature
Banner Sheet
PJL Template
This section illustrates a standard PJL template that is used to access general print features as
well as WorkCentre Product specific features. This template lists each feature and the syntax,
both PCL commands and PJL, required to use these features. The next section of this document
contains other examples of how to use these commands.
Section 1 (Opening Command, Required for all files)
<ESC>%-12345X@PJL JOB MODE=PRINTER
Section 2 (PJL Set Commands)
@PJL SET RESOLUTION=600
@PJL SET COPIES=1
Section 3 (PCL Code used to invoke PCL Language)
@PJL ENTER LANGUAGE=PCL
Section 4 (PCL Data Stream or ASCII Document inserted here for Options such as
selection Different Fonts, Simplex, Duplex, etc.)
,,,,,,,,,,
Section 5 (Closing Command, Required at end of Document)
Sample PJL Headers
This section contains examples of these commands in use.
Example 1 Simple Print
<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF>
@PJL COMMENT Beginning PCL Job<CR><LF>
@PJL SET OUTBIN=MAINTRAY<CR><LF>
@PJL SET QTY=1<CR><LF>
@PJL SET RESOLUTION=600<CR><LF>
@PJL SET JOBATTR="@JOAU=John"<CR><LF>
Example 2 Finishing Options (Stapling)
<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF>
@PJL SET OUTBIN=OUTBIN101<CR><LF>
@PJL SET FINISH=ON<CR><LF>
@PJL SET STAPLE=TOPLEFT<CR><LF>
dc08cc0440
Customer Support
Implementation
@PJL SET JOBATTR=
"@BANR=value"
@PJL SET JOBATTR=
"@BCMT=comment string"
<ESC>%-12345X@PJL EOJ
Values
Where value is one of the following:
START:
start sheet
DEVICE:
depend on device setting
OFF:
no banner sheet
Where string is a maximum of 255 characters
(ASCII characters in the range 20h - 7Eh are
allowed Only) as comment for banner.
Page 9