Xerox Phaser 5335 설치 매뉴얼 - 페이지 3

{카테고리_이름} Xerox Phaser 5335에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 5335 17 페이지. Network expansion card
Xerox Phaser 5335에 대해서도 마찬가지입니다: 사양 (2 페이지), 설치 매뉴얼 (2 페이지)

페이지 인쇄

Pull the rear cover forward and remove it

from the printer.

Loosen the three screws that secure the

metal plate cover inside the printer.

Pull the metal plate cover forward and

remove it from the printer.

Align the connector of the network

expansion card with the card connector

(located at the left of the controller board)

and insert the card into the connector.

Important

• The connector at the right of the controller board is for

an internal hard disk (optional). Make sure to insert the

network expansion card into the correct connector.

Push the network expansion card as shown

in the figure and firmly insert it into the

connector. You may need to wiggle the

board slightly to get it to seat properly.

Card connector