Xerox DocuTech 6135 계획 매뉴얼 - 페이지 29
{카테고리_이름} Xerox DocuTech 6135에 대한 계획 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuTech 6135 38 페이지. Docusp version 3.6
Xerox DocuTech 6135에 대해서도 마찬가지입니다: 사양 (2 페이지), 시작하기 (28 페이지), 계획 매뉴얼 (20 페이지), 설치 매뉴얼 (2 페이지), 계획 매뉴얼 (16 페이지), 릴리스 노트 (2 페이지)
페이지 인쇄
C.P. Bourg Document Finisher (BDFx)
5. Xerox iGen3 Digital Production Press
Performance Specifications
Stapling / Folding
Paper Type /
Weight
Paper Size
Booklet Sizes
Edge Stapling
Face Trim
Stitch Head
Sheet Capacity
(Stitching)
Input Height
Listed below are the Performance Specifications for the C.P.
Bourg Document Finisher, Cover Feeder, SquareEdge Module
and Sheet Rotator.
Note: For specific information on the BDFx together with the
Xerox Book Factory, please refer to the Xerox Book Factory
SPG.
Specifications
BDFx / SQEDG: Uncoated Stock, 16 lbs Bond – 110 lbs Index (60 - 200 gsm)
BDFx w / BSR in bypass mode: 8 x 10" - 14" x 18.5" SEF" (203 x 254 mm - 356 x 470 mm)
BDFx w / BSR in rotate mode: 8" x 10" LEF - 9" x 14" LEF (203 x 254 mm - 228 x 356 mm)
BDFx w / BSR in bypass mode: 8 x 5" - 14 x 9.25" (203 x 127 mm - 356 x 235 mm)
BDFx w / BSR in rotate mode: 8 x 5" - 9 x 7" (203 x 127 mm - 228 x 178 mm)
BDFx w / BSR: 8 x 10" – 11.7 x 14" (203 x 254 mm – 297 x 356 mm)
0 – ¾" (0 – 19 mm)
Two to four stitch heads (Hohner or Acme)
Edge / Top / Corner Stitching: 2 – 50 sheets
Saddle Stitching: 2 – 22 sheets (20 lb Bond / 80 gsm)
34" (860 mm) and 40.2" (1021 mm)
Note: For more information on the BSR, please refer to the C.P.
Bourg Sheet Rotator Solutions Planning Guide.
Rotating / Bypass
Paper Size (Rotating)
Paper Size
(Pass through)
Paper Weight
Input Height
Output Height
Specifications / Limitations
Maximum: 9" x 14" LEF (228 x 356 mm)
Minimum: 8" x 10" LEF (203 x254 mm)
Maximum: 14" x 18.5" SEF (356 x 470 mm)
Minimum: 8" x 10" SEF (203 x 254 mm)
16 lbs – 110 lbs (60 - 200 gsm)
34" (860 mm)
34" (860 mm)
5-1