Yamaha Arius YDP-141 소유자 매뉴얼 - 페이지 17

{카테고리_이름} Yamaha Arius YDP-141에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Arius YDP-141 40 페이지. Owner's manual
Yamaha Arius YDP-141에 대해서도 마찬가지입니다: 미디 데이터 포맷 (6 페이지), 빠른 작동 매뉴얼 (2 페이지)

페이지 인쇄

Using the Pedals

Damper (Right) pedal

The damper pedal functions in the same way as a

damper pedal on an acoustic piano. When the damper

pedal is pressed, notes sustain longer. Releasing the

pedal immediately stops (damps) any sustained notes.

The damper pedal features a half-pedal function.

Sostenuto (Center) pedal

If you play a note or chord on the keyboard and press

the sostenuto pedal while the note(s) are held, those

notes will sustain as long as you hold the pedal (as if the

damper pedal had been pressed) but all subsequently

played notes will not be sustained. This makes it

possible to sustain a chord, for example, while other

notes are played "staccato."

Soft (Left) pedal

The soft pedal reduces the volume and slightly changes the timbre of notes played while

the pedal is pressed. The soft pedal will not affect notes that are already playing when it is

pressed.

Damper Resonance (YDP-161)

The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you were pressing

the damper pedal and playing the keyboard. This effect is applied to the entire sound of the instrument.

Turning the Damper Resonance effect on or off

While holding down the [PIANO/VOICE] button, press the G 2 key to turn Damper

Resonance "ON".

While holding down the [PIANO/VOICE] button, press the G2 key to turn Damper

Resonance "OFF".

The lowest key

When you press the damper

pedal here, the notes you play

before you release the pedal

sustain longer.

When you press the sostenuto

pedal here while holding the

note, the note will sustain as

long as you hold the pedal.

G 2

(Off)

(On)

YDP-161/141 Owner's Manual

Selecting & Playing Voices

If the damper pedal doesn't

work, make sure that the

pedal cord is properly

plugged into the main unit

(page 35).

What is the half-pedal

function?

This function allows the

sustain length to vary

depending on how far the

pedal is pressed. The

farther you press the pedal,

the more the sound

sustains. For example, if

you press the damper pedal

and all notes you are

playing sound a bit murky

and loud with too much

sustain, you can release the

pedal half way to subdue

the sustain (murkiness)

Organ and string voices will

continue to sound for as long

as the sostenuto pedal is

depressed.

Default setting: