Yamaha Bassoons 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha Bassoons에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Bassoons 15 페이지. Bassoon

Assembly

Attaching the Bocal

Make sure that the whisper key's pad on

the tenor joint is open.

First apply some cork grease or suitably

moisten the cork, then attach the bocal as

shown in the illustration below.

■ Adjusting the Joint Sections

Whisper Key

■ Tuning

● Body joints are wrapped with string. If

the joints fit tight, loosen the string to

adjust the fit. (If you don't have the

time to do this, applying some cork

grease.)

● The bocal's joint section is covered

with cork. Make sure cork grease is

applied to the cork before assembling.

Also, some models use cork on the

joints. If so, make sure cork grease is

applied to the corks before assem-

bling.

● The Yamaha Bassoon is supplied with

two bocals of different lengths. Select

the bocal according to the pitch you

want the bassoon tuned to. When

exchanging the bocal to adjust the

pitch, pay close attention to the

whisper key's pad. Air will leak if the

pad is not properly aligned with the

tone hole.