Yamaha Clavinova CLP-121S 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Yamaha Clavinova CLP-121S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Clavinova CLP-121S 23 페이지. Yamaha digital piano owner's manual
Yamaha Clavinova CLP-121S에 대해서도 마찬가지입니다: (프랑스어) 마누엘 디렉션 (25 페이지)

페이지 인쇄

MIDI Functions

The MIDI Split & Left Local OFF Mode

In the MIDI split mode one section of the Clavinova keyboard is used to play a Clavinova voice in the normal

way, while the remaining section is used to play a second MIDI keyboard or tone generator such as the Yamaha

DOM-30 Disk Orchestra Module. In this mode the right-hand section of the keyboard is used to play an internal

Clavinova voice, while the left-hand section of the keyboard plays the external keyboard or tone generator.

Playing the left-hand section of the keyboard produces no sound from the Clavinova. The "split point," or the

key that divides the left- and right-hand sections of the keyboard can be set at any desired key.

OPTIONAL IN

MIDI OUT

Clavinova

PIANO

MIDI/

TRANSPOSE

SPLIT POINT

Left-hand section plays

Right-hand section plays a

a DOM-30 bass voice.

Clavinova piano voice.

(Clavinova) voice with the right hand while playing a synthesizer bass line

LINE OUT

MIDI

or string section with the left hand.

DOM-30

section are transmitted via the Clavinova MIDI OUT connector on MIDI

channel 2. Notes played on the right-hand section are transmitted on the

(Set to receive on

"basic channel" (i.e. the channel set using the MIDI channel selection func-

MIDI channel 2)

tion described previously).

HARPSI-

ORGAN

CHORD

The MIDI split mode is useful if, for example, you want to play a piano

When the MIDI split mode is activated, notes played on the left-hand

Press the [ORGAN] voice selector while holding down the [MIDI/

TRANSPOSE] button. The ORGAN LED will flash.

While still holding the [MIDI/TRANSPOSE] button, press the key on

the keyboard at which you want to set the split point. The ORGAN

LED will light continuously. The split-point becomes the first key of

the left-hand section.

Release the [MIDI/TRANSPOSE] button.

To return to the normal full-keyboard mode, hold the [MIDI/TRANS-

POSE] button and press the [ORGAN] voice selector, then release both

buttons.

Note: When the power is turned ON the default split point key — F # 2 — will be

automatically selected. If a new split point is selected it remains active until the

power is turned OFF or a different split point is selected.