Yamaha Disklavier Mark III series DGC1B 고급 운영 매뉴얼 - 페이지 22
{카테고리_이름} Yamaha Disklavier Mark III series DGC1B에 대한 고급 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Disklavier Mark III series DGC1B 39 페이지. Dgc1b
페이지 인쇄
6
Press [+/YES] to start the disk
formatting process.
If you do not want to continue with the
formatting process, press [–/NO].
7
Formatting is complete when the
following display appears.
Press any button to return to the normal
display.
Floppy Disk Accidental
Erasure Protection
Floppy disks have an erasure protection tab
located on the reverse side of the disk in the
bottom right-hand corner. When formatting a
disk, make sure that its erasure protection tab is
set to "unprotected".
Protected
When the tab window is open,
formatting and recording are
not possible.
Unprotected
When the tab window is closed,
formatting and recording are
possible.
18
Titling Disks
You can give your own disks titles that will scroll
across the display when the disk is inserted into
the disk drive.
1
Specify a disk.
2
Press [REC].
The REC indicator lights and the
PLAY/PAUSE indicator flashes.
3
Select song No. 1, then press the
[SONG SELECT
display the disk title.
The song number disappears and the
display cursor appears at the position of the
first character in the title, as shown. If the
disk already has a title, it will be shown on
the display.
4
Use [<] and [>] to position the
cursor within the title.
5
Use the keyboard or the [–/NO]
and [+/YES] buttons to select
characters.
To enter characters using the keyboard, see
"Keyboard Character Map" on the next
page.
Pressing [ENTER] or the sustain (right)
pedal moves the cursor to the next
character.
Only 16 characters can be displayed at a
time. To see the rest of the title, use [<]
and [>].
Disk titles can be up to 64 characters long.
6
Press [STOP].
] again to