Yamaha disklavier MX-100B 서비스 매뉴얼 - 페이지 16

{카테고리_이름} Yamaha disklavier MX-100B에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha disklavier MX-100B 50 페이지.

MX-100B

4. Adjusting the pedal cushion unit

Use the adjustment screw to adjust the clearance between the pedal and the bottom sill to 1.0

mm.

5. Adjusting the hammer sensor unit

The hammer sensor position is adjusted accord-

ing to the ON position of the M2 sensor. Press

the hammer forward and use the spacer to make

adjustments so that the M2 is ON when there is a

1.5+/-0.8 mm gap between the string and the tip

of the hammer.

Procedure

(1) While pressing the L/R buttons, turn the

power switch ON and the test program will

begin.

(2) Press the + button 8 times to move to the

Piano Test (keyboard playback will begin).

(3) Press the STOP button to stop playback.

(4) Manually press the hammer to move it toward

the string.

(5) When M2 turns on, the buzzer will sound.

This allows you to adjust the sensor position.