Yamaha DSP-A590 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Yamaha DSP-A590에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DSP-A590 27 페이지. Natural sound digital sound field processing amplifier
페이지 인쇄
CONNECTING SPEAKERS
Connect the respective speakers to this unit as figured below.
Center speaker
Note on front speaker connection:
One or two speaker systems can be connected to this unit. If
you connect only one speaker system, connect it to either the
SPEAKERS A or B terminals.
FRONT LEVEL switch
<
U.K., Europe and Australia models only
Normally set to "0 dB". If desired, you can decrease the
output level at the FRONT SPEAKERS terminals by 10 dB by
setting this switch to "–10 dB".
l0 dB
FRONT
LEVEL
Rear speakers
Right
8 MIN.
/SPEAKER
REAR
CENTER
C
DUAL
C
D:4 MIN./SPEAKER
SINGLE
SINGLE:8 MIN./SPEAKER
SPEAKERS
SPEAKERS
A
B
FRONT
Right
Front speakers B
>
0 dB
Left
OUTPUT
FRONT CENTER
REAR
D
LOW
PASS
fc:200Hz
A
A OR B:8 MIN.
/SPEAKER
A
B:l6 MIN.
/SPEAKER
B
-
l0 dB
0 dB
FRONT
LEVEL
Right
FRONT LEVEL
switch
(U.K., Europe and
Australia models)
Left
Note on center speaker connection:
One or two center speakers can be connected to this unit. If
you cannot place the center speaker on or under the TV, it is
recommended to use two center speakers and place them on
both sides of the TV to orient the center sound at the center
position. For connecting two center speakers, follow the
method shown below.
REAR
CENTER
Center speaker
Left
Front speakers A
C
D
DUAL
SINGLE
Center speaker
9