Yamaha DSP-A970 운영 매뉴얼 - 페이지 44
{카테고리_이름} Yamaha DSP-A970에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DSP-A970 48 페이지. Digital sound field processing amplifier
페이지 인쇄
LIVENESS
How it Affects the Sound:
This parameter changes the apparent reflectivity of the walls in
the hall.
The early reflections from a sound source will lose intensity
(decay) much faster in a room with acoustically absorbent wall
surfaces than in one which has mostly reflective surfaces. A room
with highly reflective surfaces in which the early reflections decay
slowly is termed "live", while a room with absorbent characteristics in
which the reflections decay rapidly is termed "dead". The LIVENESS
parameter lets you adjust the early reflection decay rate, and thus the
"liveness" of the room.
What it Does:
Changes the rate at which the early reflections decay.
Control Range:
0 – 10.
Level
Small
Time
Dead
42
Level
Level
Direct sound
Large
Time
REV. TIME (Reverberation Time)
How it Affects the Sound:
The natural reverberation time of a room depends primarily on its
size and the characteristics of its inner surfaces. This parameter,
therefore, changes the apparent size of the acoustic environment
over an extremely wide range.
What it Does:
Adjusts the amount of time it takes for the level of the dense,
subsequent reverberation sound to decay by 60 dB (@ 1 kHz).
Control Range:
1.0 – 5.0 seconds.
The reverb time in a small-to-medium size hall would be between
1 and 2, and in a large hall it is normally between 2 and 3.
Level
60 dB
Time
REV. TIME
Live
Reverberations
Level
Direct sound
Early reflections
Small
Large
60 dB
Time
Time
REV. TIME
Reverberations
Level
60 dB
Time
REV. TIME
Reverberations