Yamaha IF2115 매뉴얼 - 페이지 4

{카테고리_이름} Yamaha IF2115에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha IF2115 16 페이지. Installation series loudspeakers
Yamaha IF2115에 대해서도 마찬가지입니다: 소유자 매뉴얼 (6 페이지), 애플리케이션 매뉴얼 (45 페이지)

페이지 인쇄

2. Do not allow inexperienced persons to carry out installation. Installation personnel

should be trained in loudspeaker mounting / flying techniques in accordance with the

level of skill required for the job.

3. Always inspect all components - the cabinets, supplied eyebolts and any third party

accessories - for damage before assembly. If you suspect any component to be

sub-standard DO NOT use the affected part, but contact the manufacturer

immediately and arrange alternative parts.

4. Appropriate Personal Protective Equipment (PPE), such as protective headwear,

footwear and eyewear should be worn at all times during the installation process.

5. Ensure that all relevant health & safety regulations are understood and adhered to.

Information on applicable legislation can often be obtained from local government

offices.

6. Mounting loudspeakers often necessitates working at height. Ensure that all

personnel involved are suitably trained and equipped for working at height and also to

use any access equipment (scaffolding tower, moving work platform, fly grid etc).

7. Ensure that all lifting equipment (rigging components, wire rope, slings, brackets,

motor hoists and control systems etc.) are certified as safe and that they pass a visual

inspection prior to use.

8. Carefully read all included instructions shipped with the loudspeakers and any

rigging parts. If you don't fully understand them, seek advice.

9. Ensure that public and personnel are not allowed to pass beneath the loudspeaker

system during the installation process. The work area should be isolated from public

access until installation is complete and has been inspected.

10. Never leave the system unattended during the installation process.

11. Do not place any object (e.g. a tool or rigging item) on top of a loudspeaker during

installation. The object may fall and cause injury.

12. Secondary steels must be fitted even if not required by the local safety standards

applicable to the territory. They must be installed once the system has been suspended

to operating height, and before access is granted to public and personnel.

13. Ensure that the system is designed to avoid any form of dynamic or shock loading. If

in doubt, always consult a suitably qualified structural engineer.

14. Do not rig any other components from the loudspeaker system.

15. Installation activities must be either completed by or at a minimum supervised by a

certified rigger. .

16. Follow local safety regulations when working with speakers.

Yamaha cannot be held responsible for damage or injury caused by insufficient strength of the

support structure or improper installation. Illustrations herein are for explanatory purposes