aerauliqa THS Series 특정 매뉴얼 - 페이지 11

{카테고리_이름} aerauliqa THS Series에 대한 특정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aerauliqa THS Series 20 페이지.

페이지 인쇄

THS RANGE

Ceiling High Volume Low Speed Fan (HVLS)

INDEX

GENERAL INFORMATION

2. PRECUTIONS

3. TYPE

4. MAIN FEATURES

5. DATA

6. DIMENSIONS AND CLEARANCES

7. COMPONENTS

8. INSTALLATION

9. WIRING DIAGRAM

9.1 CTRL-A (accessory on request)

9.2 CTRL-HS (accessory on request)

9.3 CTRL-XWS (accessory on request)

9.4 CTRL-XTHI (accessory on request)

9.5 CONTROL WITH EXTERNAL POTENTIOMETER (not supplied)

10. CLEANING

11. TROUBLESHOOTING

11.1 Connection parameters

11.2 Modbus registers - Input register

11.3 Alarm codes / led status / troubleshooting

12. DECLARATION OF CONFORMITY AND INCORPORATION

1. GENERAL INFORMATION

Carefully read the instructions contained in this manual.

This Specific Manual MUST be read in conjunction with the "Installation, Operation and Maintance General Manual".

Note: store the manual for future reference. We reserve the right to improve and make changes to the manual, products and

accessories without any obligation to update previous productions and manuals.

The installation and service of the unit and complete ventilation system must be performed by an authorized installer and in

accordance with local rules and regulationid.

2. PRECAUTIONS

In addition to the precautions indicated in the "Installation, Operation and Maintenance General Manual" special attention should

be paid to the following warning notes:

-The fan must be installed at a height of not less than 2.7m from the floor below. Installation at a lower height is

considered "improper use". In case of "improper use" the manufacturer declines all responsibility for any damage

that may be caused to persons or property, and any warranty will be considered invalid.

RECOMMENDED BOLT TORQUE FOR COARSE THREADED METRIC STEEL BOLTS TE-TCEI GRADE 8.

Dimensions

9,5

Table 1 Use the values shown in the table to tighten all the screws.

- fixing: check/inspect and eventually retighten all the fixing annually.

- windy conditions: fans should not operate in case of strong wind (6m/s) and should not be installed in places where it is

frequently windy.

- weight: it is recommended that the building structure is capable to bear approx. twice the weight of the fan as well as a

torque of at least 350Nm. A professional structural engineer should perform an evaluation before installing the fan.

- key safety features: make sure that all the supplied key safety features are used to install the fan to provide a comprehensive

protection of people, animals, equipments and property.

The installer and the building owner are responsible to ensure the safety of the fan mounting system and that the fan installation

is correct, in compliance with any national and local regulations.

3. TYPE

Ceiling fans with EC brushless motor designed for industrial, civil and zootechnical applications, where high performance with

low rotation speed are required.

M10

M12

M14

M16

127

198

Translated from Original Instructions