Zanussi ZSF 6161 S 사용자 설명서 - 페이지 20

{카테고리_이름} Zanussi ZSF 6161 S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZSF 6161 S 28 페이지.

페이지 인쇄

Environmental concerns

Packaging material

The packaging materials are environmentally

friendly and can be recycled. The plastic com-

ponents are identified by markings, e.g. >PE<,

>PS<, etc. Please dispose of the packaging

materials in the appropriate container at the

community waste disposal facilities.

CAUTION!

When a unit is no longer being used:

• Pull the plug out of the socket.

• Cut off the cable and plug and dispose of

them.

• Dispose of the door catch. This prevents

children from trapping themselves inside

and endangering their lives.

What to do if ...

The dishwasher will not start or stops during

operation. Certain problems are due to the lack

of simple maintenance or oversights, which can

be solved with the help of the indications de-

scribed in the chart, without calling out an

engineer.

Fault code and malfunction

appears in the digital display.

The dishwasher does not fill with water.

The symbol

on the product or on its pack-

aging indicates that this product may not be

treated as household waste. Instead it should

be taken to the appropriate collection point for

the recycling of electrical and electronic equip-

ment. By ensuring this product is disposed of

correctly, you will help prevent potential nega-

tive consequences for the environment and

human health, which could otherwise be

caused by inappropriate waste handling of this

product. For more detailed information about

recycling of this product, please contact your

local council, your household waste disposal

service or the shop where you purchased the

product.

Switch off the dishwasher, open the door and

carry out the following suggested corrective ac-

tions.

Possible cause and solution

• The water tap is blocked or furred with limescale.

Clean the water tap.

• The water tap is turned off. Turn the water tap on.

• The filter (where present) in the threaded hose fitting

at the water inlet valve is blocked.

Clean the filter in the threaded hose.

• The water inlet hose has not been correctly laid or

it is bent or squashed.

Check the water drain hose connection.