Zanussi ZBF22456SV 사용자 설명서 - 페이지 8
{카테고리_이름} Zanussi ZBF22456SV에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBF22456SV 17 페이지.
페이지 인쇄
PERIODIC CLEANING
CAUTION! Do not pull, move or
damage any pipes and/or cables
inside the cabinet.
CAUTION! Take care of not to
damage the cooling system.
CAUTION! When moving the cabinet,
lift it by the front edge to avoid
scratching the floor.
The equipment has to be cleaned regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe clean
to ensure they are clean and free from debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser and the
compressor at the back of the appliance with a
brush.
This operation will improve the performance of
the appliance and save electricity consumption.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
The appliance does not oper-
ate.
The appliance is noisy.
Audible or visual alarm is on.
8
DEFROSTING OF THE FREEZER
The freezer compartment is frost free. This means
that there is no build up of frost when it is in
operation, neither on the internal walls, nor on the
foods.
PERIODS OF NON-OPERATION
When the appliance is not in use for long periods,
take the following precautions:
1. Disconnect the appliance from electricity
supply.
2. Remove all food.
3. Clean the appliance and all accessories.
4. Leave the door/doors open to prevent
unpleasant smells.
Possible cause
The appliance is switched
off.
The mains plug is not con-
nected to the mains socket
correctly.
There is no voltage in the
mains socket.
The appliance is not suppor-
ted properly.
The cabinet has been re-
cently switched on or the
temperature is still too high.
The temperature in the appli-
ance is too high.
WARNING! If you want to keep the
appliance switched on, ask somebody
to check it once in a while to prevent
the food inside from spoiling in case of
a power failure.
Solution
Switch on the appliance.
Connect the mains plug to the
mains socket correctly.
Connect a different electrical ap-
pliance to the mains socket.
Contact a qualified electrician.
Check if the appliance stands
stable.
Refer to "Door open alarm" or
"High temperature alarm".
Refer to "High temperature
alarm".