Zanussi ZNB 404W 지침서 - 페이지 13
{카테고리_이름} Zanussi ZNB 404W에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZNB 404W 20 페이지.
페이지 인쇄Technical Data
Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption (kWh/24h)
(kWh/year)
Energy class, according to EU standards
Freezing capacity (kg/24h)
Rising time (h)
Rated current (A)
Noise Lc (dB)
Weight (kg)
Number of compressors
Installing the appliance
Transportation, unpacking
The appliance and the interior fittings are protected for
transport.
Remove all packaging and any adhesive tape.
Any remnants of adhesive can be removed using
white spirit.
After transportation the appliance must not be
switched on for 2 hours. This is to allow the refriger-
ant to settle.
Cleaning
Clean the accessories and the inside of the appliance
with warm water and bicarbonate of soda (5 ml
to 0.5 litres of water). Rinse and dry thoroughly.
Do not use detergents, abrasive powders, highly per-
fumed cleaning products, wax polishes or cleaning
products containing bleach or alcohol.
Ins
tr
uctions f
Ins
tr
uctions f
ZNB 404 W ZNB 404 S
Refrigerator:
Refrigerator:
or the Ins
or the Ins
251
Freezer: 122
240
Freezer: 109
595
2010
632
1,12
409
A
10
16
0,6
42
77
1
Location
The appliance should be positioned in a well ventilated,
dry room.
Energy use is affected by the ambient temperature.
The appliance should therefore:
not be installed next to radiators, cookers or other
sources of heat
only be installed at a location where the ambient tem-
perature corresponds to the climate classification,
for which the appliance is designed.
The climate classification can be found on the rating
plate.
The following table shows which ambient temperature is
correct for each climate classification:
Climate Classification
SN
ST
t
aller
t
aller
Ambient Temperature
+10 to +32 °C
N
+16 to +32 °C
+18 to +38 °C
13