ABB Relion 615 series 빠른 시작 매뉴얼

{카테고리_이름} ABB Relion 615 series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB Relion 615 series 4 페이지. Motor protection and control
ABB Relion 615 series에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (20 페이지), 빠른 설치 매뉴얼 (16 페이지), 빠른 설치 매뉴얼 (20 페이지), 빠른 설치 매뉴얼 (16 페이지), 엔지니어링 매뉴얼 (20 페이지), 애플리케이션 매뉴얼 (20 페이지)

—

Quick Start Guide

Relion® 615 series

Display

Self-supervision and

protection indicator LEDs

Programmable LEDs

Control Circuit Breaker (CB)

Escape / Cancel

Navigation

Enter / Select

Authorization

Clear

Local / Remote

Help

Default view can be selected from single line diagram (SLD), measurements and main menu

Ready-LED steady: OK, Ready-LED flashing: Internal Relay Fault (IRF),

Start-LED steady: protection started, Start-LED flashing: protection function blocked,

Trip-LED: protection operated

Can be programmed for alarming and indication with latching and/or flashing features

Press open/close and confirm by pressing enter. If there is more than one controllable object

select the object first with navigation buttons. Note: control has to be in Local mode.

Used for canceling actions and leaving setting mode without saving the values.

Returns back to menu.

Left = go back, Right = go further, Up = scroll up, Down = scroll down.

Up/down can also be used when selecting controllable objects like breakers and

switches in single line diagram.

Entering to parameter setting mode and confirming new values

If authorization is used you can log in or log out using this button

Clearing events and indications, see next page for further details

Switch views in between the main menu, single line diagram and measurements

Changes the control between Local/Remote

View help messages