Alemite 3641 서비스 매뉴얼 - 페이지 10
{카테고리_이름} Alemite 3641에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alemite 3641 14 페이지. Electronic preset metered control valve
페이지 인쇄SER 3640
Overhaul
NOTE: Refer to Figure 2-A and 2-B for
component identification on the major com-
ponents of the valve assembly.
Prior to performing any maintenance procedure, the
following safety precautions must be observed. Personal
injury may occur.
WARNING
Do not use halogenated hydrocarbon sol-
vents such as methylene chloride or 1,1,1 trichlo-
roethane in this valve assembly. An explosion can
result within an enclosed device capable of con-
taining pressure when aluminum and/or zinc-
plated parts come in contact with halogenated
hydrocarbon solvents.
Release all pressure within the system prior to
performing any overhaul procedure.
• Disconnect the air supply line from the pump
motor.
• Into an appropriate container, operate the
control valve to discharge remaining pressure
within the system.
Never point a control valve at any portion of your
body or another person. Accidental discharge of
pressure and/or material can result in personal
injury.
Read each step of the instructions carefully. Make
sure a proper understanding is achieved before
proceeding.
Disassembly
Extensions and Nozzles
1. Unscrew the extension assembly from Control Valve
Assembly (11).
2. Separate the components of the extension assembly.
Non-Drip Nozzle (Automatic w/ Manual Lock)
1. Unscrew Nozzle (49) from Angle Body (54).
2. Remove O-Ring (50) from the Nozzle.
3. Remove Stem (52) from the Nozzle.
Revision (10-04)
Electronic Preset Metered Control Valve
4. Remove V-Block (51) and Spring (53) from the Stem.
5. Unscrew Screw Assembly (57) from the Angle Body.
6. Remove Washer (56) from the Screw Assembly.
7. Remove Gasket (55) from the Angle Body.
Item
Part No.
No.
49
Nozzle
50
O-Ring, 1/2 " ID x 5/8 " OD
51
V-Block
52
Stem
53
Spring
54
Body, Angle
55
Gasket
56
Washer
57
Screw Assembly
Legend:
Part numbers left blank are not available separately
designates a repair kit item
Repair Kit
Part No.
Kit Symbol
393518
Figure 8 Nozzle Assembly 318400-2 - Exploded View
10
Description
Notes
Description
Kit, Repair
Alemite Corporation
Qty
1
1
1
1
1
1
1
1
1