Alemite 3685-K 서비스 매뉴얼 - 페이지 8

{카테고리_이름} Alemite 3685-K에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alemite 3685-K 10 페이지. Mechanical-metered control valve

페이지 인쇄

SER 3685-A

Revision (11-08)

1-800-548-1191-http://[email protected]

Mechanical-Metered Control Valve

23. Turn the Outer Pointer counterclockwise.

• Set both Pointers to zero.

24. Install Shroud (27) [notch downward] onto the

Housing.

25. Install Screws (28) that secure the Shroud to the

Housing.

• Tighten each Screw securely.

Lever Assembly

26. Install Quad Rings (38) onto each end of Cam

(39).

27. Install the Cam into the Housing.

• Use care passing the Quad Rings.

28. Install Lever Assembly (41) onto the Cam.

• Reposition the Cam as required to ensure the

Lever Assembly properly meshes.

29. Install Screws (40) that secure the Lever

Assembly to the Cam.

• Tighten the Screws securely.

Valve and Inlet Swivel Assembly

30. Install Valve Sleeve (37) [unslotted end first] into

the Housing.

31. Install Valve Assembly (36) [stem first] into the

small end of Spring (35).

32. Install the Valve Assembly and Spring

horizontally into the Housing.

• Make sure the Valve Assembly does not shift.

33. Install Screen (34) into the Spring.

34. Install O-Ring (33) onto the Adapter (32).

35. Screw the Adapter into the Housing.

• Tighten the Adapter to 20 ft. lbs. (26 Nm).

36. Screw Swivel Assembly (9) [with thread sealant]

into the Adapter.

• Tighten the Swivel Assembly securely.

Extension

IMPORTANT: Apply thread sealant to

all pipe thread connections prior to

assembly.

37. Connect the components of the extension

assembly and tighten securely.

38. Screw the extension assembly into Meter

Assembly (8).

• Tighten the extension securely.

Alemite LLC