Alemite 6320-3 서비스 매뉴얼 - 페이지 4
{카테고리_이름} Alemite 6320-3에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alemite 6320-3 10 페이지. High-pressure control valve
페이지 인쇄
SER 6320-3
Description and Operation
high pressure applications up to 7500 psi (517 Bars). The valve dispenses a variety of lubricants
from numerous types of power-operated equipment.
Modes-of-Operation
Single-Shot and Continuous Flow
of a preset measured amount of product. Release the lever to complete the preset delivery.
Depress the valve lever completely and hold to provide a continuous flow of material.
Specifications
Accessories
Preventive Maintenance
maintenance.
Revision (1-13)
The model 6320-3 high-pressure control valve is all steel construction. It is designed for
Connect the control valve to a fitting prior to operation. High velocity
discharge can result in injury to personnel.
The valve has two modes-of-operation. When the lever is partially depressed, it delivers 1/2
Material Inlet
1/4 " NPTF (f)
Table 1 High-Pressure Control Valve Model 6320-3 Specifications
Altering the control valve with the addition of a flexible hose extension
is not recommended. Personal injury may occur. If a flexible extension is
mandatory, use only Alemite Corporation extension hose number 6778.
Part Number
6778
Table 2 High-Pressure Control Valve Model 6320-3 Accessory
Refer to section entitled Overhaul for details on the procedures necessary to perform
Daily
Wipe Exterior with
Inspect for Leakage
Clean Cloth
Table 3 High-Pressure Control Valve Model 6320-3 Preventive Maintenance Schedule
WARNING
Maximum Operating Pressure
Material Outlet
1/8 " NPTF (f)
WARNING
Rigid/Flexible Extension
Weekly
Monthly
Adjust Lever
4
High-Pressure Control Valve
psi
Bars
7500
517
Description
Yearly
Alemite LLC