Alphawave Photonics Corp. AWCL-300-6P-Audio 사용자 설명서 - 페이지 5
{카테고리_이름} Alphawave Photonics Corp. AWCL-300-6P-Audio에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphawave Photonics Corp. AWCL-300-6P-Audio 10 페이지. 3 channels pwm/audio synchronized color led controller
페이지 인쇄（Side view）
Vled
: The connector of LED's power supply which is based on the LED Module. (DC 12V/24V)。
B
: The connector of the Blue LED 。 （cathode of Blue LED module）
G
: The connector of the Green LED 。 （cathode of Green LED module）
R
: The connector of the Red LED 。 （cathode of Red LED module）
"N"
: The switcher of audio input source， No Audio input Option。
"L"
: The switcher of audio input source， Audio Line-in Option。
"M"
: The switcher of audio input source， Microphone Option。
（Front View）
Vled
: The Power Connector of Led 。The Voltage is based on the LED strips，12V/24V supported。
" ━ "
: The Ground of Power Supply。
DC-In
: The Power adapter input of
"S"
: The adjustment VR of sensitivity for Audio input（included Line-in and microphone） 。Increase the
sensitivity in clockwise。
Line-In
: The plug of Audio Line-in。
If you want to connect the A
splitter connecting
WCL-300-6P-Series and generic audio equipment simultaneously. It is easier to adjust the
A
sensitivity of AWCL-300-6P-Series. Thus, would not in fact causes the volume of the stereo is regulated. The
Connect diagram is shown as followed：
The connect diagram of AWCL-300-6P-Series combine the generic audio equipments：
Copyright ©2008 By Taiwanese
AWCL-300-6P-Series, Shorted to Vled in default 。
WCL-300-6P-Series to the generic audio equipment, we recommend utilizing the AV
User's Manual of AWCL-300-6P-Series
PAGE 5
12V/24V Supported。
V1.0 – Dec. 02, 2009