Lenovo 9360-4PX 설치 매뉴얼 - 페이지 27

{카테고리_이름} Lenovo 9360-4PX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 9360-4PX 42 페이지.

Installing threaded rails

You must install devices that have threaded holes or device rails that have threaded holes on the rail-

mounting flange on the inside of the rack-mounting flanges. See the device documentation for detailed

information about how to use threaded rails.

You must use cage nuts for all optional devices that do not have threaded holes. The rack comes with a

supply of cage nuts, and devices that require them come with cage nuts. Cage nuts are installed on the

inside of the rack-mounting flanges with either the cage-nut-insertion tool or a flat-blade screwdriver. The

cage-nut-insertion tool comes with the rack and some optional devices.

Complete the following steps to install a cage nut with the cage-nut-insertion tool.

Cage nut

Cage-nut-insertion tool

Rack mounting

flange

Figure 17. Installing cage nuts with the cage-nut-insertion tool

1. Determine the hole in which you want to install the cage nut.

2. From the inside of the rack mounting flange, insert one edge of the cage nut into the hole.

3. Push the tool through the hole and hook the other edge of the cage nut.

4. Pull the tool and the cage nut back through the hole to complete the installation of the cage

nut.