Lenovo ThinkSystem NE1032 빠른 시작 매뉴얼 - 페이지 16

{카테고리_이름} Lenovo ThinkSystem NE1032에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkSystem NE1032 22 페이지. For lenovo cloud network operating system
Lenovo ThinkSystem NE1032에 대해서도 마찬가지입니다: 제품 설명서 (26 페이지), 빠른 시작 매뉴얼 (14 페이지)

페이지 인쇄

Booting in ONIE Mode

Booting in ONIE Install Mode

Lenovo ONIE Quick Start Guide for NE1032

After you activate and install an ONIE image, you can boot the switch in ONIE

mode. ONIE offers four modes for booting, each providing a different operation:



ONIE install mode

ONIE rescue mode



ONIE uninstall mode

ONIE update mode



There are two ways to boot the switch in an ONIE mode:



using the Command Line Interface (CLI):

Lenovo Cloud Network OS:



– startup image onie-image install

– startup image onie-image rescue

– startup image onie-image uninstall

– startup image onie-image update

using the Boot Management Menu (for more details, see



Menu" on page

19)

Note: For CNOS, the CLI commands for booting in different ONIE modes display

an error if the ONIE license key is not installed on the switch. To install the ONIE

license key, see

"Installing the ONIE FoD License Key" on page

The following pages describe the four ONIE modes and how the CLI commands

can be used to boot the switch in each mode.

This mode is used to install a NOS using ONIE. The ONIE install mode boots the

ONIE kernel and file-system and executes the ONIE discovery process. The

discovery process uses a number of different mechanisms to find a NOS installer

program.

Once a NOS installer is found, it is downloaded and executed. The installer loads

the Network OS on the switch, updates required ONIE environment variables, and

reboots the switch.

The switch now runs its newly installed Network OS and behaves like a regular

switch. The user can, at any point, reboot and run the ONIE installer again to

install another Network OS.

The Lenovo ONIE installer image, which installs the different Lenovo Network

Operating Systems, is called onie-installer-powerpc-lenovo_ne1032-r0,

and it is available at the following link:

http://support.lenovo.com/

"The Boot Management

12.