Nikon F3 사용 설명서 - 페이지 44
{카테고리_이름} Nikon F3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon F3 47 페이지. 35mm single-lens reflex camera
Nikon F3에 대해서도 마찬가지입니다: 사용자 설명서 (3 페이지), 사용 설명서 (48 페이지), 사용 설명서 (47 페이지)
44
SPECIFICATIONS-------------
Type of camera
Picture format
Lens
mount
Lenses
Shutter
Shutter speeds
Shutter release
Backup mechanical
release
lever
Self-timer
35mm single-lens reflex
24mm x 36mm
(standard
35mm
film format)
Nikon bayonet mount
Nikkor
5011.2, 5011.4, 5011.8,
and Nikon Series E 5011 .8 as
standard; more
than
55 Nikkor
and Nikon
Series
E lenses
available
Horizontal-travel,
titanium focal
-
plane shutter
Auto:
Electromagnetically
con-
trolled
stepless
speeds from 8 to
1/2000 sec.;
Manual:
Quartz/
electromagnetically controlled
discrete speeds from 8 to
1/2000
sec., plus B and X (l /80 sec.);
mechanical: T
setting on shutter
speed dial and
1/60
sec
.
when
using
backup mechanical
release lever
Electromagnetic
shutter release;
initial
pressure on shutter release
button switches on meter (alter
power
switch is turned on). meter
then
remains on
for
16 sec. after
finger is
taken off button
Trips
shutter at 1/60 sec. regard-
less
of shutter speed dial setting
except at T; used
when
batteries
are dead
Quartz-timed 10 sec. delayed
exposure; LED blinks at 2Hz for
first 8 sec. then at 8Hz for last 2 sec
.
Exposure control
Film speed range
Metering range
Exposure
compensation dial
Exposure memory
lock
Accessory shoe
Aperture-priority
automatic
exposure with manual
override
and
backup mechanical
control;
through-the-Iens, full aperture
metering via
silicon
photo diode
(SPD) with center-weighted
metering pattern and metering
circuits incorporated into
camera body; meter works with
all Viewfinders
ASA 12 to ASA
6400
EV I
to
EV
18
at ASA 100 with
fll.41ens
PrOVided;
±2 EV in one-third
increments
Provided; operates on Auto to
electronically lock in shutter
speed
Provided;
special Nikon type
located at base of rewind knob;
accepts Nikon
SB-12
shoe-
mounting
electronic
flash unit or
TTL
connecting
cord
from SB-11
for TTL
direct
flash
output
control using camera's SPD
metering
cell
Flash synchronization
Speeds up to 1/80 sec. with
electronic flash; with SB-12, flash
sync is automatically set to 1/80
sec. when shutler speed dial is
set ai
"A,
" or
1/125 sec. or above;
flash
synchronizes with shutler
speed set at slower shutler speed
settings; threaded sync terminal