Nikon D90 - Digital Camera SLR 매뉴얼 - 페이지 24

{카테고리_이름} Nikon D90 - Digital Camera SLR에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon D90 - Digital Camera SLR 28 페이지. Focal digital camera
Nikon D90 - Digital Camera SLR에 대해서도 마찬가지입니다: 브로셔 및 사양 (9 페이지), 운영 매뉴얼 (20 페이지), 사양 (2 페이지), 사용자 설명서 (26 페이지), 체크리스트 및 운영 매뉴얼 (25 페이지), 방법 (6 페이지), 매뉴얼 (30 페이지)

페이지 인쇄

Part I

Using the Nikon D90

Shutter speed. By default, this set

of numbers shows you the shutter

speed setting. This set of numbers

also shows myriad other settings

depending on which buttons are

pressed:

•

Exposure compensation value.

Press the Exposure Compensation

button to display the EV compen-

sation number then rotate the

main command dial to adjust.

•

FEC value. Press the Flash

mode button to display the FEC

number then rotate the sub-

command dial to adjust.

•

WB ﬁ ne-tuning. Pressing the

WB button and then rotating

the Sub-command dial ﬁ ne-

tunes the white balance setting.

A is warmer, and B is cooler.

•

Color temperature. When the

WB is set to K, the panel dis-

plays the color temperature in

the Kelvin scale when you press

the WB button.

F-stop/Aperture indicator. At

default settings, this displays the

aperture at which the camera is set.

This indicator also displays auto-

bracketing compensation incre-

ments. The exposure bracketing

can be adjusted to over- and

underexpose in 1/3-stop incre-

ments. When the Function (Fn)

button is set to auto-bracketing, the

number of exposure value (EV)

stops is displayed in this area. The

choices are 0.3, 0.7, or 1.0 EV. The

WB auto-bracketing can also be

adjusted; the settings are 1, 2, or 3.

Release mode. This set of icons

shows which Release mode the

camera is set to: Single, Continuous

Low, or Continuous High.

Continuous shooting speed. This

displays the continuous shooting

speed in frames per second (fps).

Self-timer/Remote. These icons

can show separately or together.

When both icons are lit, the camera

is in Delayed Remote mode.

ISO sensitivity indicator. This

appears above the ISO sensitivity

setting number. When Auto ISO is

activated, AUTO appears after ISO.

Beep indicator. This icon, which

looks like a musical note, informs

you that the camera beeps when

the self-timer is activated or when

the camera achieves focus when in

Single Focus mode. When the

musical note appears inside a circle

with a slash, the beep function is

turned oﬀ . This can be done in

CSM d1. Turning the beep oﬀ is

usually the ﬁ rst the thing I do when

I conﬁ gure a new camera.

K. This appears when the number

of remaining exposures exceeds

1000. This isn't to be confused with

the K that may appear in the WB

area, which is used to denote the

Kelvin temperature.

White balance settings. These

icons indicate which WB setting the

camera is set to. A set of opposing

arrows appears if the WB setting

has been modiﬁ ed by applying

ﬁ ne-tuning.