ARMOUR SY001-2018-NEW 매뉴얼 - 페이지 12

{카테고리_이름} ARMOUR SY001-2018-NEW에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARMOUR SY001-2018-NEW 20 페이지.

페이지 인쇄

1. Pulizia E Manutenzione

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions

to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool's operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power

tool for operations different from those intended

could result in a hazardous situation.

h) If the supply cord is damaged, it must be

replaced by a special cord or assembly

available from the manufacturer or it's service

agent.

5) Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

When using the pump, always observe the following

safety instructions.

■

Before use check the pump for damage.

Should the pump be damaged, it must not be

used.

■

Only connect the pump to an electric group

which is protected with an earth leakage switch

(30 mA).

■

Do not use the pump in swimming pools

or other places where persons could find

themselves in the vicinity of the pump in the

water.

■

Do not use the pump in fish ponds or fountains.

■

Never use the pump if no outlet pipe of min. 20

cm has been fitted.

■

If the pump is used for pumping drinking water,

the installation must be rinsed thoroughly.

■

Never let the pump run dry.

■

Never carry the pump by the mains cable or

float switch, but only by the handle.

■

Always remove the mains plug from the wall

socket before moving or servicing the pump.

■

If the mains cable is damaged, it has to be

replaced by the manufacturer, its after-sales

service or a similarly qualified person, in order

to avoid a danger.

The following symbols are used throughout this

manual:

Denotes risk of personal injury or damage

to the machine.

ADDITIONAL SAFETY INSTRUCTIONS FOR

COMPRESSORS

■

Be cautious when using compressed air. Never

aim the air flow at people or animals. Preferably

wear safety glasses. Do not use compressed

air to clean clothing.

Compressed air is not suitable to inhale.

■

Do not exceed the maximum operating

pressure. Do not perform any adjustments to

the machine because of which the maximum

operating pressure may be exceeded.

■

Never exceed the maximum allowed pressure

of the equipment to be connected or the items

to be inflated with this machine.

■

Do not use the machine in an ambient

temperature below 5 °C.

■

Only use the machine in dry, well-ventilated

surroundings. If the machine is used for the

spraying of inflammable substances, place the

machine upwind and at a safe distance.

SYSTEM+