Discount Car Stereo BLU-C5 설치 매뉴얼 - 페이지 4

{카테고리_이름} Discount Car Stereo BLU-C5에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo BLU-C5 9 페이지. Music streaming module for seelect 1997-04 corvette
Discount Car Stereo BLU-C5에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 설치 지침 (12 페이지), 설치 매뉴얼 (10 페이지), 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (12 페이지)

페이지 인쇄

Installation 2

(To factory 10-pin plug in trunk/hatch)

Alert! Vehicle must be wired for optional 12-disc changer.

present) must be disconnected. To retain used of the 12-disc changer purchase

our

A2D-C5

Locate factory 10-pin CD Changer plug in trunk/hatch or if vehicle has

12-disc CD Changer, disconnected it from changer (See Fig. 6)

Factory 12-disc Changer

2. Connect factory 10-pin plug (See Fig. 7) to 10-pin connector (white) on

install harness (See Fig. 8)

10-pin plug

12-disc Changer (if

Fig. 6

Fig. 7

10-pin connector

3. Proceed to step 4 on page 2 to complete the rest of the installation.

Pairing:

Pairing process varies among devices but the process is basically the same.

This is only required upon initial install and will not have to be repeated.

Turn Ignition and Radio "ON"

Red LED inside module peephole will flash (pairing mode)

Settings, Wireless & Networks, Bluetooth

2. On A2DP device: Go to

Settings

Bluetooth

3. Select

and turn on.

4. Select Bluetooth settings

Scan (Search) for devices

5. Tap

6. Wait for Bluetooth device name to appear and select it.

Red LED inside adapter peephole will glow steady (paired)

Fig. 8