ARO 650719-C 운영자 매뉴얼 - 페이지 6

{카테고리_이름} ARO 650719-C에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARO 650719-C 8 페이지. 2" diaphragm pump u.l. listed, 1:1 ratio, metallic

ARO 650719-C 운영자 매뉴얼
Indicates parts included in 637118-C air section repair kit.
Item Description
(size)
101 Motor Body
(includes items 195)
102 "O" Ring
(0.07" x 1.25" o.d.)
103 Sleeve
104 Retaining Ring
(1-5/32 i.d.)
105 Screw / Washer
(1/4" - 20 x 5/8")
107 Plate
108 Gasket
(with notch)
109 Piston
110 "U" Cup
(3/16" x 1-3/8" o.d.)
111 Spool
112 Washer
(1.556" o.d.)
113 "O" Ring
(1/8" x 1-1/4" o.d.)
114 "O" Ring
(3/32" x 1-9/16" o.d.)
115 Spacer
116 Spacer
117 Gasket
"Smart Parts", keep these items on hand in addition to the service kit for fast repair and reduction of down time.
MATERIAL CODE
[A] = Aluminum
[C] = Carbon Steel
[B] = Nitrile
[D] = Acetal
[Bz] = Bronze
[Ny] = Nylon
AIR MOTOR SECTION SERVICE
Service is divided into two parts - 1. Pilot Valve, 2. Major
Valve.
GENERAL REASSEMBLY NOTES:
Air Motor Section service is continued from Fluid Section
repair.
Inspect and replace old parts with new parts as neces-
sary. Look for deep scratches on metallic surfaces, and
nicks or cuts in "O" rings.
Take precautions to prevent cutting "O" rings upon instal-
lation.
Lubricate "O" rings with Key-Lube grease or equivalent.
Do not over-tighten fasteners. Refer to torque specifi ca-
tion block on view.
Re-torque fasteners following restart.
PILOT VALVE DISASSEMBLY
1.
Remove (104) retaining ring.
2.
Remove (123) screws and (122) "O" rings.
3.
Remove (118) pilot rod, (121) sleeve bushing, (119) "O"
rings and (120) spacers from the (101) motor body.
4.
Remove (103) sleeve and (102) "O" rings.
Page 6 of 8
PARTS LIST / 650719-C AIR MOTOR SECTION
AIR MOTOR PARTS LIST
(Qty) Part No.
[Mtl]
(1) 93161
[A]
(2) 92960
[B]
(1) 94528
[D]
(2) Y145-26
[C]
(8) 93860
[C]
(2) 93707-1
[SS]
(1) 92878
[B/Ny]
(1) 92011
[D]
(1) Y186-51
[B]
(1) 92005
[A]
(5) 92877
[Z]
(5) Y325-214
[B]
(6) Y325-126
[B]
(4) 92876
[Z]
(1) 92006
[Z]
(1) 92004
[B/Ny]
[SS] = Stainless Steel
[U] = Polyurethane
[Z] = Zinc
Item Description
(size)
118 Pilot Rod
119 "O" Ring
(1/8" x 3/4" o.d.)
120 Spacer
121 Sleeve Bushing
122 "O" Ring
(3/32" x 9/16" o.d.)
123 Screw
(#8 - 32 x 3/8")
126 Pipe Plug
(1/2 - 14 N.P.T. x 17/32")
127 90° Street Elbow
(3/4 - 14 N.P.T.)
128 Pipe Plug
(1/8 - 27 N.P.T. x 1/4")
195 Button Head Screw
(1/4" - 20 x 1/4")
196 Button Head Screw
(1/4" - 20 x 3/8")
201 Muffl er
Key-Lube "O" Ring Lubricant
Key-Lube, 10 Pack
PILOT VALVE REASSEMBLY
1.
Replace two (102) "O" rings, if worn or damaged, and rein-
stall (103) sleeve.
2.
Install one of the (121) sleeve bushings, (119) "O" rings,
(120) spacers and the remaining (121) bushing.
3.
Carefully push (118) pilot rod into bushing etc. and retain
on each end with the two (122) "O" rings. Retain with (123)
screws.
4.
Replace (104) retaining rings.
MAJOR VALVE DISASSEMBLY
1.
Remove (107) plate and (108 and 117) gaskets.
2.
On the side opposite the air inlet, push on the inner di-
ameter of (111) spool. This will force the (109) piston out.
Continue pushing the (111) spool and remove. Check for
scratches and gouges.
3.
Reach into the air section (exhaust side) and remove (116)
spacer, (115) spacers, (113) "O" rings, (114) "O" rings, (112)
washers, etc. Check for damaged "O" rings.
MAJOR VALVE REASSEMBLY
NOTE: Replace worn parts as necessary. Lubricate "O"
rings with Key-Lube or equivalent when reassembling.
1.
Replace (112) washer, (114) "O" ring and (113) "O" ring
onto (115) spacer and insert etc. NOTE: Be careful to ori-
ent spacer legs away from blocking internal ports.
2.
Lubricate and carefully insert (111) spool.
3.
Install (117) gasket and (107) plate.
4.
Lubricate and install (110) packing cup and insert (109)
piston into (air inlet side) cavity, the (110) packing cup
lips should point outward.
5.
Install (108) gasket and replace (107) plate.
(Qty) Part No.
[Mtl]
(1) 93309-2
[C]
(4) 93075
[U]
(3) 115959
[Z]
(2) 98723-2
[Bz]
(2) 94820
[U]
(4) Y154-41
[C]
(1) Y227-5-L
[C]
(1) Y43-5-C
[C]
(1) Y227-2-L
[C]
(2) 94987
[SS]
(1) 94987-1
[SS]
(1) 350-568
[C]
(1) 93706-1
637175
650719-C (en)