ARO CHOP-CHECK 650941-X-C 운영자 매뉴얼
{카테고리_이름} ARO CHOP-CHECK 650941-X-C에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARO CHOP-CHECK 650941-X-C 2 페이지. Chop-check pump series
페이지 인쇄
OPERATOR'S MANUAL
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING.
INCLUDE MANUALS: 66236-X-B Lower Pump End (pn 97999-489), 67314-B Hydraulic Motor (pn 97999-1220)
& S-632 General Information Manual (pn 97999-624)
4.125 SQ." HYDRAULIC MOTOR
1.2:1 RATIO
6" STROKE
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
•
Use only genuine ARO
R
pressure rating and longest service life.
•
637450 for repair of hydraulic motor section.
•
637128-XX4-B for repair of lower pump section. Refer to the
chart on page 2 for description of -XXE options.
SPECIFICATIONS
Model Series
(refer to option chart)
Type
. . . . .
Hydraulic Operated, Chop-Check Double Acting Pump
Ratio
. . . . . . . . . . . . . . . . . . . . . . . . .
Air Motor
. . . . . . . . . . . . . . . . . . . . . .
Motor Repair Kit
. . . . . . . . . . . . . . .
Motor Size
. . . . . . . . . . . . . . . . . . .
Stroke
. . . . . . . . . . . . . . . . . . . . . .
Hydraulic Inlet (female)
. . . . . . . . . .
Hydraulic Return (female)
Lower Pump End Series
. . . . . . . . . .
Lower Pump Repair Kit
. . . . . . . . .
Material Outlet (female)
. . . . . . . . .
Weight
. . . . . . . . . . . . . . . . . . . . . . . .
PERFORMANCE
Hydraulic Inlet Pressure Range
Fluid Pressure Range
. . . . . . . .
Maximum Rec'd Cycles / Minute
3
Displacement In
Per Cycle
Volume / Cycle
. . . . . . . . . . . . . . . . . .
Cycles Per Gallon
. . . . . . . . . . . . . . .
Flow @ 50 Cycles / Minute
. . . . . . . . .
Noise Level . . . . . . . . . . . . . . . . . . . . N/A
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
www.ingersollrandproducts.com
CHOP-CHECK PUMP SERIES
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
replacement parts to assure compatible
. . . . . . . .
650941-XXE-C
1.2:1
67314-B
637450
4.125 sq." (26.6 sq. cm)
6" (15.2 cm)
1/2 - 14 N.P.T.F. - 2
. . . . . . . .
3/4 - 14 N.P.S.M.
66236-XXE-B
637128-XX4-B
1-1/2 - 11-1/2 N.P.T.F. - 1
144 lbs (65.3 kgs)
.
50 - 2000 p.s.i. (3.4 - 137.9 bar)
60 - 2670 p.s.i. (4.1 - 184.1 bar)
. . . .
50
. . . . . . . .
40.2
22.3 oz. (658.4 ml)
5.7
8.7 g.p.m. (32.9 l.p.m.)
CCN 99834939
© 2011
650941-XXE-C
CARBON STEEL
PUMP DATA
MODEL 650941-XXE-C
52-27/32"
(1342.2 mm)
38-15/32"
(977.1 mm)
19-15/16"
(506.4 mm)
2-7/8"
(73.1 mm)
Accessories Available: 65139 Floor Mount, 62151 Wall Mount Bracket.
This is one of the four documents which support the pump. Re-
placement copies of these forms are available upon request.
= 650941-X-C Model Operator's Manual (pn 97999-877)
- S-632 General Information − Industrial Piston Pumps (pn 97999-624)
- 66236-X-B Lower Pump End Operator's Manual (pn 97999-489)
- 67314-B Hydraulic Motor Operator's Manual (pn 97999-1220)
650941-X-C
RELEASED:
REVISED:
(REV. E)
K Items included in 67322 Motor
and Tie Rod Assembly.
Hydraulic Inlet (female)
1/2 - 14 N.P.T.F. - 2
Hydraulic Motor 67322
(see manual 67314-B)
Spacer Section
Cap Screw Y6-130-C (3) K
Lock Washer Y14-750-K (3) K
Connector (see figure 2)
Spacer Rod 95907 (3) K
Lock Washer Y14-750-K (3)
Cap Screw Y6-128-C (3)
Material Outlet (female)
1-1/2 - 11-1/2 N.P.T.F. - 1
(95_ from hydraulic inlet)
Lower Pump 66236-XXE-B
(see manual 66236-X-B)
IMPORTANT
1-14-00
10-13-11
K
Figure 1