ARO PE03P A0S Series 운영자 매뉴얼 - 페이지 6
{카테고리_이름} ARO PE03P A0S Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARO PE03P A0S Series 12 페이지. 3/8” diaphragm pump
페이지 인쇄(n) Indicates parts included in 637428 Air Section Repair Kit.
Item
Description
(size)
101 Center Body
103R Cover
(right side)
103L Cover
(left side)
118 Actuator Pin
121 Washer
123 Screw
(#4 - 20 x 1/2")
128 Plug
(#10 - 32 x 5/32")
129 Muffler Baffle
130 Gasket
n
132 Air Manifold Gasket
133 Washer
(9/32" i.d. x 5/8" o.d.)
134 Flange Bolt
(1/4" - 20 x 1-1/2")
135 Porting Plate
n
144 "U" Cup Packing
(1/8" x 3/4" o.d.)
MATERIAL CODE
[B]
= Nitrile
[PPG] = Glass Filled Polypropylene
[D]
= Acetal
[SS] = Stainless Steel
[Ny]
= Nylon
[SY] = Syn-Seal
[P]
= Polypropylene
[U]
DIAPHRAGM PUMP SERVICE
GENERAL SERVICE NOTES:
S
Inspect and replace old parts with new parts as necessary. Look for
deep scratches on metallic surfaces, and nicks or cuts in "O" rings.
S
Tools needed to complete disassembly and repair:
S
5/8" socket or wrench, 7/16" socket or wrench, 3/8" socket or
wrench, 5/16" Allen wrench, T-10 Torx screwdriver, torque
wrench (measuring inch pounds), "O" ring pick.
FLUID SECTION DISASSEMBLY
1. Remove (61) top manifold.
2. Remove (19) "O" rings, (21) seats and (22) balls.
3. Remove (60) bottom manifold.
4. Remove (19) "O" rings, (21) seats and (22) balls.
5. Remove (15) fluid caps.
6. Remove (6) diaphragm nut, (7) or (7 / 8) diaphragms and (5) washer.
7. Remove (1) connecting rod from air motor.
8. Carefully remove remaining (6) diaphragm nut, (7) or (7 / 8) dia-
phragms and (5) washer from (1) connecting rod. Do not mar sur-
face of connecting rod.
FLUID SECTION REASSEMBLY
S
Reassemble in reverse order.
S
Lubricate (1) connecting rod with Lubriplate or equivalent "O" ring
lubricant.
S
Install (5) washers with i.d. chamfer toward diaphragm.
S
When replacing PTFE diaphragms, install the 96533-A Santoprene
diaphragm behind the PTFE diaphragm.
Page 6 of 12
PARTS LIST / PE03P-X-X-A0S AIR MOTOR SECTION
Qty Part No.
(1)
96570
(1)
96488
(1)
96489
(2)
94874-1
(2)
96092
(12) 96093
(2)
59632-1
(1)
96542
(1)
96531
(1)
96214-1
(4)
93096
(4)
Y6-47-T
(1)
96382
(2)
Y187-47
= Polyurethane
[Mtl]
Item
Description
n
[PPG]
167 Pilot Piston
[D]
168 "O" Ring
(1/16" x 7/16" o.d.)
[D]
169 "U" Cup Packing
[SS]
170 Spool Bushing
n
[D]
171 "O" Ring
(1/16" x 13/16" o.d.)
n
[SS]
173 "O" Ring
(3/32" x 7/8" o.d.)
n
[Ny]
174 "O" Ring
(3/32" x 11/32" o.d.)
n
[P]
200 Porting Gasket
n
[SY]
232 "O" Ring
(1/16" x 3/8" o.d.)
[B]
236 Nut
(1/4" - 20)
[SS]
n
[SS]
Lubriplate FML-2 Grease
[PPG]
Lubriplate Grease, 10 Pack
[B]
AIR MOTOR SECTION SERVICE
S
Air Motor Section Service is continued from Fluid Section repair.
PILOT VALVE DISASSEMBLY
1. Remove (123) screws, releasing (103) covers, (121) washers, (118)
actuator pins and (167) pilot piston.
2. Remove (170) spool bushing and inspect inner bore of bushing for
damage.
3. Unthread (123) screws, releasing (129) muffler baffle.
4. Unthread (134) bolts and pull (135) porting plate and (132 and 200)
gaskets from (101) center body.
PILOT VALVE REASSEMBLY
1. Clean and lubricate parts not being replaced from service kit.
2. Assemble (171) "O" rings to (170) bushing and assemble bushing
into (101) center body.
3. Lubricate and assemble (167) pilot piston assembly into (170) bush-
ing.
4. Assemble (173 and 174) "O" rings and (121) washers to (103) cov-
ers, then insert (118) actuator pins through assembly.
5. Assemble (144) "U" cups (note the lip direction) and (103) covers to
(101) center body, securing with (123) screws. NOTE: Tighten (123)
screws to 4 - 6 in. lbs (0.45 - 0.68 Nm).
6. Assemble (132 and 200) gaskets and (135) porting plate to center
body, securing with (134) bolts. NOTE: Tighten (134) bolts to 15 - 20
in. lbs (1.7 - 2.3 Nm).
7. Assemble (130) gasket and (129) muffler baffle to (101) center body,
securing with (123) screws. NOTE: Tighten (123) screws to 4 - 6 in.
lbs (0.45 - 0.68 Nm).
Qty Part No.
(size)
(1)
67382
(includes 168 and 169)
(2)
96459
(1)
96384
(1/8" x 5/8" o.d.)
(1)
96090
(2)
Y325-17
(2)
Y325-115
(2)
Y325-105
(1)
96364
(4)
Y325-10
(4)
Y12-4-S
(1)
94276
637308
PE03P-X-X-A0S (en)
[Mtl]
[D]
[U]
[U]
[D]
[B]
[B]
[B]
[B]
[B]
[SS]