Aerial AD 740 Series 사용 설명서 - 페이지 6

{카테고리_이름} Aerial AD 740 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aerial AD 740 Series 15 페이지.

5.2 Putting into operation

ATTENTION:

Before putting the air dryer into operation, the instruction manual should be studied

carefully. Thus, damages by a false or inappropriate operation as well as by

inadequate environmental conditions can be avoided.

For using the air dryer, please proceed as follows:

Ø After having been transported, the air dryer should rest for about 15 min. During

this period of time, the oil inside the refrigerating system, that was foamed

during transport will return into the compressor. We recommend this procedure

since it extends the service life of the compressor.

Ø Put the plug into the socket.

Ø Check whether the bucket is placed in the unit (AD 730 / 740 standard) or a

drain hose has been fastened and laid appropriately (AD 770 / 790 standard,

AD 730 / 750 option).

Ø Switch on the unit by actuating the ON-OFF-switch.

Ø Set the required humidity value at the hygrostat (please refer in this respect to

'Hygrostat Control').

Ø If the existing humidity is higher than the set value, the air dryer will start to

operate.

If the existing humidity is lower than the set value, the air dryer will not start to

operate

5.3 Operation panel AD 740 / AD 750

Page 6 of 15