Aerial AD 810 사용 설명서 - 페이지 7

{카테고리_이름} Aerial AD 810에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aerial AD 810 14 페이지.

Aerial AD 810 사용 설명서

6.3 Operation panel

On-/Off-switch
neon: Check
pump (Pt. 6.5)
Operation time
counter

6.4 Hygrostat control

The air dryers of the AD-series dispose of a hygrostat for setting the required
humidity value. This hygrostat is located in the operation panel of the unit.
It makes that the air dryer cuts in as soon as the ambient humidity exceeds the
preset value. If the humidity value falls below the set value, the hygrostat will switch
off the unit.
The hygrostat is placed in the operation panel laterally at the unit.
Pos. 0
= Unit is switched off
Pos. 1
= Continues operation
80-100% = The dehumidifier switches off
when a humidity of approx.
80 - 95% r.h. has achieved.
And switches on again when
humidity is higher than 80-95%.
60 - 80% = The dehumidifier switches
off when a humidity of approx.
60 - 80% r.h. has achieved.
And switches on again when
humidity is higher than 60-80%.
40 - 60% = The dehumidifier switches off when a humidity of approx. 40 - 60% r.h.
has achieved. And switches on again when humidity is higher than 40-60%.
20 - 40% = The dehumidifier switches off when a humidity of approx. 20 - 40% r.h.
has achieved. And switches on again when humidity is higher than 20-40%.
page 7 of 14
Hygrostat
(Pkt. 6.4)
Ventilation slot
for room air flow
for hygrostat (do
not cover!!!)