array K Python KP102-54 Mark I 사용자 설명서 - 페이지 8

{카테고리_이름} array K Python KP102-54 Mark I에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. array K Python KP102-54 Mark I 13 페이지.

KP52-54 I - KP102-54 I

6. WIRING

KP52-54 I and KP102-54 I feature a 2x2.5 cable coming out from the chassis, ready to be connected to

the cable coming from the amplifier.

KP52-54 I and KP102-54 I feature a switch which allows users to select the impedance of the speaker

(KP52-54 I: 8/32 Ω, KP102-54 I: 4/16 Ω).

The value to be selected depends mainly on the amplifier you use to drive the unit. Impedance must

be set to high (32 Ω for KP52-54 I and 16 Ω for KP102-54 I) when speakers are driven by KMT active

modules or by the KA84 amplifier. Low impedance may be used when speakers are driven by a KA24

amplifier.

Please refer to your amplifier's specifications to select the correct speaker impedance for your

configuration.

KP52-54 I @ 8

KP52-54 I @ 32

KP102-54 I @ 4

KP102-54 I @ 16

IMPEDANCE SWITCH

KA24 amp

COVERAGE SWITCH

KA84 amp

YES

Ver. 1.0

Red +

Black -

KMT sub

YES