Aerial AB 500 Series 사용 설명서 - 페이지 5

{카테고리_이름} Aerial AB 500 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aerial AB 500 Series 12 페이지. Sound box with high pressure blower

The sound box is furnished also with a power counter ( ( a) shows kWh from the

very first start of the unit) and a device socket (b) max. 8 A). During the using of

the sound box in connection with an adsorption dryer, the electrical supply of the

dryer can occur via this device socket.

Maximal connection: 8A

The sound box is equipped with handles for transportation. (at Ab 200 one

handle on the top, at AB 500 and AB 1000 two lateral handles)

The rubber bumpers of the sound box are set up from not coming off, food genuine

material.

Optionaly the AB 500 and AB 1000 is also available with transport frame and big

wheels.

The side channel blower is stored in the sound box on oscillation dampening

grommets.

For the connection of hose systems and air filters, the sound box has tube double

nipple of the size 1½").

4. Safety

The sound boxes are furnished with protective devices. The devices were subjected

to a safety examination. Dangers threaten in the case of operating error or abuse

- for the user.

- for the machine and other real values.

- for the efficient work of the machine.

All persons who have to do with the installation, service and maintenance of the

devices must be qualified correspondingly and consider this operating manual

precisely.

Using as directed

The sound boxes with blower are intended for the drying out of cavities.

Risk by accessory

Hoses, fittings and air filters must be fit expertly and must not take the protective

devices of the sound box out of operation. The control elements must always

remain freely amenable.

Authorized users

The service of the sound boxes AB 200, AB 500 and AB 1000 may only be carried

out by persons that were instructed from the operator. The user is responsible in the

field of action third parties compared to.

Responsibilities for different activities on the device must of course be determined

and kept. Unclear competences are a safety hazard.

The operator must make the operating instruction amenable for the user and make

sure that the user did understand the manual.

page 5 of 12