Abbyson PRM-OUTD-BEL-FS-FT(02416) 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} Abbyson PRM-OUTD-BEL-FS-FT(02416)에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abbyson PRM-OUTD-BEL-FS-FT(02416) 13 페이지.

Safety Information

SET UP YOUR FURNITURE PROPERLY

Ensure that all parts are assembled properly and fully tightened as per

□

the instructions.

EXAMINE YOUR FURNITURE

Examine occasionally to ensure that there are no loose parts. If loose

□

parts are found, they must be retightened fully before additional use.

INSTALLATION MEETS REQUIREMENT

The installation must conform with local codes, or in the absence of local

□

codes with the National Fuel Gas Code，ANSI Z223.1 • NFPA 54; National

Fuel Gas Code; Natural Gas and Propane Installation Code, CSA B149.1; or

Propane Storage and Handling Code, CSA B149.2, as applicable;

INSTRUCTION TO INSPECT THE BURNER

The burner must be replaced prior to the appliance being put into operation

□

if it is evident that burner is damaged. The replacement burner shall be that

specified by the manufacturer.

Warranty

WHAT IS COVERED

This product is covered under the manufacturer's 1 -Year Limited

□

Warranty against defects in materials and workmanship. If your furniture

frame fails structurally due to inferior metals or welds during normal use

within two years of purchase, the manufacturer will repair or replace the

defective piece. Resin weave and cushions are warranted for 1 -Year

from date of purchase. Peeling, crackling, blistering, discoloration or

fading are also warranted for 1-Year from the date of purchase.

Warranty is to the origin al purchaser and is non -transferable. Proof of

purchase (dated register receipt) and in some cases, photos of product are

required for warranty claims. Lack of original receipt will void the

warranty. We reserve the right to make substitutions with similar

merchandise, if the model in question is no longer in production.