Altocraft 68125136 운영자 매뉴얼 - 페이지 16

{카테고리_이름} Altocraft 68125136에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altocraft 68125136 20 페이지. 18v cordless drill / driver

페이지 인쇄

IMPORTANT SAFETY INSTRUCTIONS

SERVICE

28. Tool service must be performed only by qualified repair personnel. Service or

maintenance performed by unqualified personnel could result in a risk of injury.

29. When servicing a tool, use only identical replacement parts. Follow

instructions in the Maintenance section of this manual. Use of unauthorized

parts or failure to follow Maintenance instructionsmay create a risk of electric

shock or injury.

SAFETY INSTRUCTIONS FOR CORDLESS DRILL/DRIVER

Always wear safety goggles or eye protection when using this tool. Use a



dust mask or respirator for applications which generate dust.

Do not grasp the tool or place your hands too close to the spinning chuck or



drill bit. Your hand may be lacerated or may cause injury.

Secure the material being worked on. Never hold it in your hand or across



your legs.Unstable support can cause loss of control and injury.

Position yourself to avoid being caught between the tool or side handle and



walls or posts. Should the socket or bit become bound in the work, the reaction

torque of the tool could crush your hand or leg.

Check to see that keys and adjusting wrenches are removed from the



Cordless Drill before switching the tool "ON". Keys or wrenches can fly away

at high velocity striking you or a bystander.

When using the Cordless Drill, always maintain a firm grip on the tool with



both hands.

Hold tool by insulated gripping surfaces when performing an operation



where the cutting tool may contact hidden wiring. Contact with a "live" wire will

also make exposed metal parts of the tool "live" and shock the operator.

Keep the handle of the Cordless Drill dry, clean, and free from oil and



grease.

Do not run the Cordless Drill while carrying it at your side. A spinning socket



or bit could become entangled with clothing and injury may result.

Disconnect the plug or remove the battery pack from tool and place the



switch in the locked or "OFF" position before making any assembly

adjustments, changing accessories, performing any inspection,

maintenance or cleaning procedures. Such preventive safety measures reduce

the risk of starting the tool accidentally.

Do not use the Cordless Drill if it has been damaged, left outdoors in the



rain, snow, wet or damp environments, or immersed in liquid.

CD302