ClearWater Lights Darla 설치 매뉴얼 - 페이지 8
{카테고리_이름} ClearWater Lights Darla에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearWater Lights Darla 12 페이지. Led light kit for bmw k1600gt
ClearWater Lights Darla에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지)
페이지 인쇄
Installing the CANopener
The CANopener utilizes the bike's Lean Angle Sensor and its connector for
a proper install. The Lean Angle Sensor is located just in front of the battery
(highlighted with a red circle). Unplug the factory harness from the Lean An-
gle Sensor and plug in the CANopener. Then plug the BMW factory harness
back into the CANopener such that the CANopener acts as a pass through.
Plug the data cable into the mating
connector on the CANopener (green
connector) and ensure it is plugged
into the harness at the front of the
bike as well. Neatly bundle any ex-
cess wires with a couple zip ties and
mount the CANopener in the area in
front of the battery with the attached
velcro. Remove the the fuse from the
fuse holder and attach it to the red
wire from the harness. The power
wires can be connected to the battery.
Page 7