Abcon ProShip 사용 설명서 - 페이지 6

{카테고리_이름} Abcon ProShip에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abcon ProShip 17 페이지.

FUNCTION

HOLD FUNCTION

Once the HOLD button is pressed, the indicator will remain on the display for 120

seconds after the item has been removed from the scale so the weight can easily be read.

1. Place the item on the scale platform.

2. Wait for the stable indicator to be displayed.

3. Press the [HOLD] button. The HOLD hold indication will turn-on.

4. Disabling the hold function: Once an item is weighed and the hold function is enabled

you want to quit to hold function, press the [HOLD] button again to cancel the "." hold

indicator and return the scale to weight mode.

MEASURING UNIT CHANGE / CONVERSION

BEFORE PLACING ITEM ON PLATFORM:

The measuring unit (i.e. g or oz) can be chosen before placing item onto weighing platform

by pressing [UNIT] button.

WHILST ITEM IS ON PLATFORM (CONVERSION):

If you did not choose the desired measuring unit before placing item onto platform, it is

still not too late to change (covert) it. Simply press the [UNIT] button with the item still on

the platform (or when in Hold mode) and the unit reading will be converted to your new

chosen unit [i.e. lb:oz to kg].

PROGRAMMABLE FUNCTION SETTINGS (Auto Off / Auto Backlight)

ENTERING CHANGE FUNCTION MODE:

In order to change the current function settings, it is required to enter the Change

Function mode by firstly ensuring the scale is switched OFF. Then press and hold the

[ZERO] button whilst pressing the [ON/OFF] button. Now the display will show :-

1. SELECTION OF AUTO HOLD:

Press [UNIT] button, the display will show H_ON or H_OFF. Press [ZERO] to choose

ON or OFF, this means AUTO-HOLD function is either active (ON) or inaction (OFF).

6 PROSHIP

A_ON or A_OFF