Abcon ProShip 사용 설명서 - 페이지 8

{카테고리_이름} Abcon ProShip에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abcon ProShip 17 페이지.

WEIGHING

BEFORE WEIGHING

Whenever possible, please allow the scale to warm up for several seconds after first

turning the power on so that the scale will function properly and accurately.

ERROR MESSAGES:

EEEE or Err-0

, Lob or LoBatt

1. PRESS [ON/OFF] TO TURN ON THE SCALE:

When the power is turned on the display will count down from "999999" to "111111"

and then "0" appear on the display.

2. SELECT THE WEIGHING UNIT WITH [UNIT]:

Press [UNIT] to select a weighing unit "kg", "lb". Once the unit has been selected, the

selected unit will be displayed next to the weight value.

3. START WEIGHING:

If you do not use a container for weighing:

• Verify the reading is "0". If not, press [ZERO] to display "0".

• Place the items to be weighed on the platform.

If you use a container for weighing:

• Place an empty container on the platform.

• Wait for the stability weighing to be displayed and press [ZERO].

• Place the objects to be weighed in the container.

8 PROSHIP

= Overload

= Low Battery