AltRider R119-9-1001 설치 지침 - 페이지 3
{카테고리_이름} AltRider R119-9-1001에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AltRider R119-9-1001 4 페이지. Adapter bracket kit for bmw r1250gs
페이지 인쇄2
Rider's Right
1
Once AltRider upper crash bars are installed, separate the kit contents
to each side. Note the di erence in shape for each side of the billet
peices.
Rest the top half of the clamp onto the OEM crash bar. Apply thread
3
locker thread to the M6x50 (riders right) and M6x 45 (riders left) and
install M6 washers. Carefully hand thread the fasteners through the
bottom clamp half, passing through the top half, and into the threaded
billet block as shown.
Rider's left
B
BMW R1250GS
//
Adapter Bracket Kit
Next, install each billet block into their respective upper crash bar ange
2
using the (2) M6x 16 socket cap screws, (2) M6 washers, and thread locker.
Tighten to 8Nm
4
Tighten clamp fasteners evenly to apply clamping force
on OEM crash bar. Tighten fasteners to 8Nm.
//
Installation Instructions
B