Altron TROVE Trove2HR2R 설치 매뉴얼 - 페이지 4

{카테고리_이름} Altron TROVE Trove2HR2R에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altron TROVE Trove2HR2R 8 페이지. Trove rack enclosure with altronix and identiv backplane

페이지 인쇄

Altronix Trove2R enclosure includes Z Bracket, a convenient and reliable wire management accessory.

Hardware (included):

Twelve (12) bolts and

1. Carefully unpack Z Bracket. Do not discard hardware

(included) (Fig. 3, pg. 4).

2. Attach arms to each other using bolts and

lock nuts (Fig. 4a, pg. 4).

3. Attach the hinge brackets to the ends of

arms using bolts and nuts positioning

them as shown on (Fig. 4b, pg. 5).

4. Make sure that all nuts are tightened.

Fig. 4

Fig. 3b

5. Attach the hinge bracket on each end of Z Bracket, then attache the Z Bracket to the adjustable slide

using bolts and lock nuts

(included) (Fig. 5, 5a, pg. 4).

6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts

(included).

Fig. 5

- 4 -

Z Bracket Installation for Trove2R:

eight (8) lock nuts.

Fig. 5a

Fig. 4a

Fig. 4b

Trove2HR2R Installation Guide

Fig. 3