artisan TORO 4000 Series 사용 설명서 및 예비 부품 설명서 - 페이지 4
{카테고리_이름} artisan TORO 4000 Series에 대한 사용 설명서 및 예비 부품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. artisan TORO 4000 Series 16 페이지. Extra heavy duty cylinder bed lockstitch compound needle feed walking foot stitching machines
페이지 인쇄
1.
Normal stitching operation causes dust, lint, and dirt to build up around the moving parts of your TORO-3000 and
4000. Periodically clean around all the moving parts of the machine. Pay special attention to keeping the shuttle,
shuttle race, and throat plate area clean.
Simply wipe off the build-up with a clean cloth or blow off the dirt with compressed air.
2.
TORO-4000 P
Your new artisan
TORO-3000 and 4000 was thoroughly lubricated at our factory. However please re-lubricate the
u
machine before putting the new stitcher into service.
The TORO-3000 and 4000 requires lubrication at the above points on a regular basis. Artisan recommends that the machine
is oiled about every 7 to 12 hours of actual usage.
We suggest the best time to oil the machine is at the end of your work day. When you begin to use the machine the next time,
simply wipe off the excess oil and the dirt or lint at the same time.
If sewing for prolonged periods of time oil the machine about every 5 to 7 hours.
Lubricate these five points through the front inspection cover.
4.
8.
29.