ALVEO3D ALVEOPRO - M100 사용 설명서 - 페이지 9
{카테고리_이름} ALVEO3D ALVEOPRO - M100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALVEO3D ALVEOPRO - M100 20 페이지. Filtering system for 3d printer - hepa14 & active carbon
페이지 인쇄STEP4 . CONNECT TO ENCLOSURE
Extend the other one end of the hose by 10 cm.
Use the countersunk M4 screw 16 mm for panel thickness from 2 to 7 mm.
Use the countersunk M4 screw 20 mm for panel thickness from 8 to 12 mm.
Place the clamp ring on
1.
the extended hose.
The tighten frame must be
inside the enclosure.
Tighten the clamp ring on
2.
the enclosure connector.
Insert hexagonal M4 nuts
in the tighten frame and
3.
tighten the screws to hold
the enclosure connector
on the panel.
08