3M Digital Projector X35N 제품 보증 및 안전 매뉴얼 - 페이지 14

{카테고리_이름} 3M Digital Projector X35N에 대한 제품 보증 및 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M Digital Projector X35N 19 페이지.
3M Digital Projector X35N에 대해서도 마찬가지입니다: 사양 시트 (2 페이지)

페이지 인쇄

3M Digital Projector X35N 제품 보증 및 안전 매뉴얼

Product Warranty and Safety Guide

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: Loosen the screw (marked by arrow) (1) of the lamp door and then

2. Retaining screws

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: Slowly pick up the lamp by the handles. (4) Never loosen any other

4. Insert lamp module : Insert the new lamp, and retighten firmly the 3 screws (3) of the lamp

Optional Lamp: 78-6972-0008-3

While putting the interlocking parts of the lamp door

slide the lamp door

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(1) Screw

√ Note

slide and lift the lamp door (2) to the side to remove it.

: Loosen the 3 screws (marked by arrow) (3) of the lamp.

√ Note

screws.

that are loosened in the previous process to lock it in place.

(Contact 3M Customer Service.)

(DT01025)

back in place. Then firmly fasten the screw of the lamp door.

(2)

√ Note

(2) Lamp access door

3M™ Digital Projector X30N/X35N

and the projector together,

(2)

(3) Screws

(4) Handle

(2)