Alvin XII-3-XB 조립 지침 - 페이지 2
{카테고리_이름} Alvin XII-3-XB에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Alvin XII-3-XB 2 페이지. Professional table
페이지 인쇄
Professional Table
Assembly Instructions
For 24" x 36" Tabletop
Back
11/2"
A
Center base frame until
A dimensions are equal
1"
Front
33/4"
For 31" x 42" Tabletop
51/2"
A
Center base frame until
A dimensions are equal
2"
63/4"
For 36" x 48" Tabletop
101/2"
A
Center base frame until
A dimensions are equal
2"
93/4"
©2015 Alvin & CompAny, inC. • P.O. Box 188, Windsor, CT 06095-0722
Phone: 860-243-8991 • Toll-Free: 800-444-2584 • Fax: 860-242-8037 • Toll-Free Fax: 800-777-2896
11/2"
A
1"
33/4"
Back
A
Front
63/4"
Back
Front
93/4"
Position the frame and front guide tracks using the
4
dimensions to the left, according to the size of your
tabletop. Be sure to center the frame from left to right.
Mark front guide track and rear extension tube bracket hole
locations with a pencil or awl.
Using a 1/16" bit, drill pilot holes 1/4" deep only. Use care
5
not to drill through the table top.
TIP
Wrap masking tape 1/4" from drill bit end to determine drilling depth.
Attach rear extension tube brackets and front guide tracks
6
to tabletop using 1/2" wood screws (H). See Figures 4 & 5.
Tighten securely but use care not to strip.
Carefully return table to upright position. Adjust tabletop to
7
desired height and angle using height adjustment knobs.
You're finished and your table is ready to use.
51/2"
H
x4
Figure 4
2"
To Fold Table:
Drop all extension tubes down to their lowest positions. Lift
the tabletop up until the front extension tubes disengage from
the front guide tracks, then move the left leg frame in until it
is flush against the rear frame assembly. Next, move the right
101/2"
leg frame in flush against the left leg frame. Gently lower the
tabletop down flush against the folded legs. The table is now
ready for storage.
A
2"
Page 2 of 2
H
x2
Figure 5
www.alvinco.com
LIT-A15138 11/15