AERMEC ANL-H 080 설치 매뉴얼 - 페이지 3
{카테고리_이름} AERMEC ANL-H 080에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AERMEC ANL-H 080 11 페이지. Chillers; reversible heat pumps; condensing units
페이지 인쇄
EN
2.
SELECTION AND POSITION OF INSTALLATION
count the following points:
1.
The base must be able to support the weight of the
unit.
2.
The safe distances between the unit and other
equipment or structures must be strictly respected
to ensure the intake and outlet air is free to circu-
late.
3.
The equipment must be installed by a competent
maintenance access spaces.
2.2.1.
POSITIONING
Before lifting the unit verify the lifting capability of
the equipment being used, taking into account the
information provided with the packaging.
use forklifts or similar in the most appropriate manner
taking into account the weight distribution of the unit.
When lifting (ANL 102-202) insert through the unit's
base holes lifting bars (NOT PROVIDED) of sufficient
length to locate the lifting chains and safety lugs.
Position the unit in the place indicated by the client,
inserting between the unit's base and the base support
a rubber pad (minimum 10 mm thick) or feet anti-
vibration mounts (ACCESSORY). For further information
refer to the dimensional tables.
Secure the unit and ensure it is level; check that suf-
ficient access is provided for hydraulic and electrical
800
800
8
-
connections.
-
In the case of installation where gusts of wind may oc-
cur adequately secure the unit using appropriate ties.
Ensure the installation of the condensate drain tray on
units that require it (as ACCESSORY).
800
200
300
1100
ANL-ANLH 020-202
150
500
200
500
1608. 6755441_02