3M 9541V 사용자 지침 - 페이지 3

{카테고리_이름} 3M 9541V에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M 9541V 3 페이지. Particulate respirator, nuisance level organic vapor relief, standard size / earloop

페이지 인쇄

Fitting Instructions

Must be followed each time respirator is worn.

1 With nosepiece facing away from you, hold the earloop strap in each hand with the nosepiece up.

2. Position the respirator under the chin.

3. Pull each strap over the ear. Adjust the straps as comfortable as possible.

4. Place the fingertips of both hands at the top of the metal nosepiece. Mold the nosepiece to the shape

of the nose bridge by pushing inwards while moving your fingertips down both sides of the nosepiece.

Pinching the respirator nosepiece using only one hand may result in less effective respirator fit.

5. The seal of the respirator on the face should be checked by the wearer prior to entering the work

area.

a) Cover the front of the respirator with both hands, being careful not to disturb the position of the

respirator.

b) Exhale sharply. If air leaks around the nose bridge, readjust the nosepiece as described in step 4. If

air leaks at the respirator edges, work the straps back along the side of your hand. If you CANNOT

achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

c) If no leakage is detected, then work may proceed.

It is very important to press the nosepiece firmly to the nose bridge to form a good seal.

3M China Co. Ltd

222 Tianlin Road

Shanghai China 200233

Tel: 86-21-2210 5335

Fax: 86-21-2210 5035

Website : http://www.3M.com.cn/PPE

Made in China

3M is a trademark of 3M Company.