ASG X-PAQ ASG-NW2500-EIP 사용자 설명서 - 페이지 13

{카테고리_이름} ASG X-PAQ ASG-NW2500-EIP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ASG X-PAQ ASG-NW2500-EIP 15 페이지. Ethernet ip network communication module

Programming Data Output:

Similarly, each piece of output data can be located wherever the user desires in the output

message. To program any of the output data, select it from the data output sub-menu.

When the ENT key is pressed, the address of where the first byte will be placed will be

shown. The user can use the arrow keys to manipulate this value and set it to any desired

address or to DONOT SEND. Once the desired value is displayed, pressing ENT will store

that value. The ESC key can be pressed to exit without saving

Data Input

Input Data

# of Bytes

Parameter

Batch Reset

Suspend

Batch Value

Time

Date

Torque Min

Torque Max

Angle Min

Angle Max

Units

The user has the ability to decide the total number of bytes this unit

with transmit as output bytes. The user can also decide which ele-

ments of output data will be transmitted and at what address.

To set the number of output bytes, the user will want to select Num

Output Bytes from the Data Output submenu. After pressing the ENT

key, the user can use the arrow keys to set the number of output

bytes. Pressing ENT will save this value ESC will allow the user to exit

without saving a new value.

This unit is capable of receiving 40 input bytes. The user can select

which groups of information are actually received.

Default Location