Asko D3122 사용 및 관리 매뉴얼 - 페이지 7

{카테고리_이름} Asko D3122에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko D3122 16 페이지. D3122 use & care guide fr (french ucg 2+1 warranty)
Asko D3122에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (2 페이지), (스페인어) Uso Y Cuidado (16 페이지), (프랑스어) Manuel D'utilisation (16 페이지)

페이지 인쇄

OPERATING INSTR

OPERA

TING INSTRUCTIONS

TING INSTR

OPERA

TING INSTR

THE CONTR

THE CONTROL P

THE CONTR

OL PANEL

OL P

Your ASKO dishwasher has a button-operated control panel, as illustrated below. To select a wash program or option,

simply press the appropriate button. After you have selected the desired wash program and options, press Start/

Power button (on the top side of the control panel)

OGRAMS

PROGRAMS

OGRAMS

To select a program, simply press the Program button until the indicator light behind the desired program glows. The

programs are described below:

Heavy Wash (160° F or 130° F)

For the heaviest soiled loads, such as pots, pans, casseroles, etc.

Normal Wash (130° F or 140° F)

For normally soiled loads, such as plates, glasses, bowls, and lightly

soiled pans.

Quick (85° F or 120° F)

For lightly soiled loads that are washed immediately after use. This

program is good for delicate items, such as fine china and crystal,

but you should set the temperature to low and dry the dishes without

heat.

Rinse and hold

To rinse dishes that you plan to wash later that day.

Program Times

The program times may not always be the same because of variations in the household hot water temperature. The

dishwasher heats the water to the proper temperature for the program selected; so if the temperature of the water

entering the dishwasher is too low, the dishwasher will run longer because it takes longer to heat the water. Raising

your water heater setting could help to shorten the cycle times.

OPTIONS

To select an option, simply press the appropriate option button. The options are described below.

Temperature

The dishwasher has two temperature options for each wash program, as shown above. When this button

is set on the high temperature, the main wash is heated to the higher temperature for the selected

program. If it is set to low, the main wash is heated to the lower temperature. The indicator light will glow

only when the high temperature is selected.

Drying

This option speeds up the drying process by raising the temperature in the final rinse to 160° F to heat

the dishes and tank before the drying cycle begins. The indicator light will glow only when this option is

activated.

POWER BUTT

WER BUTT

WER BUTTON

WER BUTT

Use this button to turn the main power to the unit

on and off. The location of the power button is

illustrated above.

UCTIONS

ANEL

Program button

Program indicator

lights

Temperature

button

"The Normal Wash program is

used for energy testing and

should be used for normal or

lightly soiled loads. When

washing dishes that are more

heavily soiled, use a longer

program with higher

temperatures such as Heavy

Wash."

STAR

ART/ST

T/ST

T/STOP BUTT

T/ST

OP BUTT

OP BUTTON

Once you have selected the wash program and

temperature and drying options, press this button to

start the dishwasher. (Make sure the door is securely

closed.) The indicator light around the button will glow

progressively as the program goes through each cycle.

When the program is complete, the lights will glow all

the way around the button.

Stop

Start/Stop button

Drying

Program

button

progression

indicator lights

Page 7